Skip to content

ASUSTOR

First, the ASUSTOR server on the NAS must be enabled.

Tip

New Drive

1.Under Storage, select the ASUSTOR in the NAS tab.

2.Select the required options. Nextcloud1

3.Select the protocol (http/https) with the checkbox to the right of the address label, and enter server address, port number, username, password.

Options

  • Enter the path to the server to use as the top-level folder.
  • If you are not using an account, click the Anonymous checkbox.

address

4.Click the TLS/SSL drop-down list to select the TLS/SSL version. (Supported when https is selected)

TLS/SSL Versions

Select the RaiDrive TLS/SSL version based on TLS version compatibility setting on your ASUSTOR NAS.

Setting the TLS version compatibility in ASUSTOR Admin Center
Go to ASUSTOR Admin Center > Seetings > General > Management > System, enable HTTP secure (HTTPS), select Minimum security protocol and click the Apply button. tls ● Click here to learn more about TLS Version.

selectprotocol

5.Click the Timeout drop-down list to select the Timeout second, and then click the Connect button. timeout

6.The connected drive is created in the Network locations of File Explorer. explorer

Drive Connect/Disconnect

1.Clicking the Disconnect button(stop) removes the ASUSTOR you've connected from the file browser. disconnect

2.When you click the Connect button(play), ASUSTOR will be created in the Network locations of the File Explorer. connect

Drive Edit

1.If the drive is connected, click the Disconnect button(stop).

Attention

Editing is not possible while the drive is connected.

2.Click the Edit button(setting). stop_setting

3.Change any options that require correction, or select advanced options and click the OK or Apply button. setting

Drive Remove

1.If the drive is connected, click the Disconnect button(stop), then click the Delete button.(delete) deletebutton

2.When you click the OK button, the drive is removed from the list of connections. delete